FTC catalytic decarbonizer, CRD Fuel ENHANCER, DeSLUDGE and NanoEnergizer are our “work horse” products to reduce and often eliminate smoke.
Exhaust Smoke Colour and when it occurs can tell you a lot about the internal condition of an engine.
You can often stop engine exhaust smoke without the need of a mechanical repair, plus improve economy and engine power, by using these products alone or in combination: FTC catalytic decarbonizer (in the fuel); CRD Fuel ENHANCER (in the fuel); DeSLUDGE (in the engine oil prior to an oil and filter change); NanoEnergizer nanotechnology metal restorer (in the engine oil).
The above products usually pay for themselves in fuel savings, let alone all the other benefits listed under each product.
Please contact us to help you choose, which treatment is the best for your engine.
SMOKE BASICS ..
The information in this article is primarily aimed at diesel engines, since they commonly have the most smoke problems, but it will also help with gasoline (petrol) engines and 2-stroke petrol/oil fueled engines.
The most common cause of diesel engine smoke is a build-up of carbon deposits inside the engine.
Basically there are 3 types of smoke emitted from a diesel engine .. black, blue and white .. sometimes separately, sometimes all 3 at different times from the same engine.
Visible smoke from an engine indicates that something is not right. Smoke should be taken as an indication that there is a problem existing (or developing) that will potentially shorten the engine life, or result in unnecessary costs. Smoke should be regarded as an opportunity to take measures that will save you money in both the long term and also the short term.
At the least, smoke may be due to a simple problem, which is causing poor combustion efficiency and costing you excessive fuel bills (eg carboned-up engine from excessive idling, stop-start operation or short run times).
At the other end of the scale, smoke may be your last chance to act before a catastrophic engine failure occurs (eg piston seizure, valve or turbocharger failure).
A diesel engine in good condition should produce no visible smoke from the exhaust, under most operating conditions. A short puff of smoke when an engine is accelerated under load may be acceptable, due to the lag before the turbocharger speed and air flow is able to match the volume of diesel injected into the cylinders, but that would only apply to older technology diesel engines. In modern type diesels .. no smoke at all should be evident.
BLACK smoke ..
FTC catalytic decarbonizer, CRD Fuel ENHANCER, DeSLUDGE and NanoEnergizer are our “work horse” products to reduce and often eliminate black smoke.
Black smoke is the most common emitted from diesel engines and indicates incomplete combustion of the fuel. Black smoke causes can vary widely and include:
• Incorrect fuel injection timing .. commonly too retarded, which sometimes occurs by mistake at an overhaul, or cam belt change.
• Fuel injection pump wear, or incorrect settings .. commonly retarded, which gradually occurs as rotary pumps wear over 100,000km. This can be as much as 3 degrees retard per 120,000km.
• Faulty cold start, or faulty advance/retard mechanisms .. commonly retarded.
• Incorrect air/fuel ratio setting .. excessive fuel to air ratio.
• Under-performing turbocharger .. pressure too low, or air leaks.
• Air leaks in inter-cooler pipes .. pressure loss.
• Dirty or worn fuel injectors .. commonly carbon deposits affecting fuel spray pattern.
• Carbon deposits in combustion chambers .. common in lightly loaded engines.
• Excessive carbon build-up around exhaust valves and exhaust spaces.
• Sticking piston rings .. often due to carbon deposits.
• Glazed cylinder cross-hatch .. due to carbon deposits.
• Incorrect valve clearances .. often timing error when replacing cam-belts.
• Faulty valve stem seals .. rarely.
• Engine wear in general .. often misdiagnosed when carbon deposits are the real problem.
• Engine oil viscosity too low .. check oil grade against operating conditions.
• Cool operating temperatures .. coolant should reach 85C, or higher. Check thermostats.
• Exhaust gas recirculation (EGR) system faulty, or blocked with carbon.
• Engine overloaded .. reduce load, use lower gear. In boats clean the anti-foul, change propellor pitch.
• High altitude operation .. lack of oxygen to complete fuel burn.
• Dirty or restricted air cleaner systems .. air intake filter partially blocked.
• Poor quality fuel.
Black smoke can occur across the entire operating range, but is usually worst under full power, or during the lag before the turbocharger boosts air supply to match the fuel usage such as in the early stages of acceleration and during gear changes. Moderate turbo lag smoke may be acceptable, otherwise black smoke should be hardly visible in a correctly running engine.
Obviously, worn or damaged components must be replaced .. the earlier you identify and fix the problem, the less damage will be done. Keep on top of engine tune issues, including valve (tappet) adjustments, regular servicing of air, fuel and oil filters. Do not buy fuel from suspect outlets.
Dirty engine components, such as fuel injectors can be easily restored to full cleanliness by using an effective and reliable fuel system cleaner. If you choose from our range of products, FTC catalytic decarbonizer and/or CRD Fuel Enhancer are what you need.
Cleaning the internals of engines is usually considered only possible at physical overhaul, however, we provide 3 products to enable vehicle and equipment owners to quickly, safely and cheaply restore full cleanliness to fuel injectors, combustion and exhaust spaces, as well as piston rings, valves and seats, turbos, EGR, catalytic converters, oil pumps, oil galleries, and oil coolers. If you choose from our range of products, FTC catalytic decarbonizer, CRD Fuel ENHANCER and DeSLUDGE are what you need.
Black smoke is high in carbon or soot, which is an undesirable product of diesel combustion. The combustion of diesel is a complicated process of breaking down the various hydrocarbon fuel molecules into progressively smaller and smaller molecules, by extremely rapid burning (explosion) in the presence of oxygen. The main and ideal end products of combustion are CO2 (carbon dioxide a greenhouse gas) and water. It is believed that the last step in the process is carbon monoxide (a poisonous gas) to carbon dioxide. This is also the slowest step by far and when combustion conditions deteriorate some upstream bottle necking occurs in the chain of combustion reactions. This results (according to some authorities) in polymerization of smaller partly burnt molecules into much larger ones, which become visible as soot, or black smoke.
BLUE smoke ..
FTC catalytic decarbonizer, DeSLUDGE, NanoEnergizer and SupaSLIP are our “work horse” products to reduce and often eliminate blue smoke.
Blue smoke is caused by the engine burning lubricating oil. Blue smoke should not be evident at any stage.
The engine oil can enter the combustion chamber from several sources including:
• Worn valve guides, or seals
• Cylinder &/or piston ring wear
• Cylinder glaze
• Piston ring sticking
• Incorrect grade of oil .. too thin and getting past rings, or valves guides
• Fuel dilution of the oil, making it too thin.
Blue smoke is often evident at cold start, which can reflect reduced oil control due to carbon fouling deposits around the piston rings and/or cylinder glaze, which is actually carbon deposited in the machined cylinder crosshatching. These tiny grooves actually hold a film of oil, which in turn completes the seal between the combustion chamber and the oil wetted crankcase.
An engine may actually burn oil without the evidence of blue smoke, because good compression burns oil quite cleanly, however, it is not acceptable for any new engine, or engine in good internal condition to burn large amounts of lubricating oil .. with or without blue smoke.
Be aware that sometimes despite copious blue smoke, the engine lubrication oil level may remain at “normal” on the dip-stick, which maybe due to diesel fuel replacing the lost oil. Diesel fuel enters the oil via the piston ring/cylinder liner interface and is called “blow-by”. Engine oil analysis is the best way to check this, but if your oil looks OK, but the level appears to be increasing over time, it is a sure case of fuel dilution. Excessive coolant or water in the oil is easy to spot because the oil will look “milky”.
Excess fuel in the oil can lead to a catastrophic engine explosion!
Once again, restore physical cleanliness to all components. Replace worn parts where necessary. In some situations, where the engines are pretty worn, but you just need to keep them in service, cleaning with our products FTC catalytic decarbonizer and DeSLUDGE, followed by our very effective anti-friction product SupaSLIP will reduce internal stresses on all those tired components, providing extended service life. This is also where NanoEnergizer restorative metal nanotechnology in the engine oil may be most useful.
WHITE sometimes more GREYISH smoke ..
FTC catalytic decarbonizer and DeSLUDGE are our “work horse” products to reduce and often eliminate white smoke.
Diesel and petrol (gasoline) both burn to form carbon monoxide, carbon dioxide and WATER. Often what you see on cold start is steam, until the exhaust system heats up.
Steam is usually a short tail, white smoke usually billows and hangs in the air longer than steam. In boats it is common to have water injected into the exhaust system to cool it .. a small amount of steam is a common result.
White smoke is caused by raw, unburnt fuel passing into the exhaust. White smoke smells and will often sting your eyes, which is the effect from raw diesel.
Common causes include:
• Incorrect fuel injection timing
• Defective, or dirty fuel injectors
• Low cylinder compression Low cylinder compression may be caused by leaking valves, sticking, or worn piston rings, cylinder wear, or cylinder glaze.
When white smoke occurs at cold start and then disappears as the engine warms up, the most common causes are fouling deposits around piston rings and/or cylinder glazing. Continuous evidence of white smoke indicates a mechanical defect, or incorrect fuel timing.
Water entering combustion spaces will also create white smoke. Faulty head gaskets and cracked cylinder heads or blocks are a common cause of water entry .. unfortunately, expensive mechanical repair is the only proper solution here.
FTC catalytic decarbonizer, CRD Fuel ENHANCER, DeSLUDGE and NanoEnergizer are our “work horse” products to reduce and often eliminate smoke.