Neptune Products .. easy-to-use
Buy with confidence. 200% MONEY BACK PRODUCT PERFORMANCE GUARANTEE
CRD Fuel Enhancer for common rail diesel engines (CRD, CD, CDI)
Eco-friendly CDR Fuel Enhancer works without you touching a spanner .. no expensive downtime !
Simply add it to your fuel tank to get the benefits.
This diesel fuel lubricant, which also has anti-rust and deposit removal properties will likely solve CRD engine rattles, extend component life and avoid catastrophic engine failures. Suitable for use in mineral diesel, bio-diesel and mineral/bio blends. CRD Fuel Enhancer has been specifically developed to address the incredibly expensive failures faced by Common Rail Diesel (CRD, CD, CDI) engine injectors and systems.
A 250ml easy to use “squeeze-measure-pour” pack treats 2000L of fuel (1:8000).
Find Out More about CRD problems.
DeSLUDGE super powerful flushing oil concentrate for mineral, or synthetic engine oils
Eco-friendly DeSLUDGE is ideal for diesel engines and gives the following benefits, without harm to your engine:
▪ Removes abrasive oil sludge from inside engines.
▪ Frees sticking piston rings
▪ Removes cylinder glaze
▪ Reduces “blowby”
▪ Reduces engine overheating
▪ Reduces engine exhaust smoke
▪ Improves engine starting
▪ Improves idling
▪ Improves engine POWER
A 250ml easy to use “squeeze-measure-pour” pack treats 20-100L of engine oil.
FTC combustion catalyst and engine decarboniser for all diesel and gasoline/petrol engines
Eco-frendly FTC works without you touching a spanner .. no expensive “downtime”.
Simply add FTC to your fuel tank to get the following benefits:
▪ Gently removes internal carbon & cylinder glaze.
▪ Cleans piston crowns, ring grooves, injectors, valves, turbos, EGRs and catalytic converters.
▪ Regains engine power & performance.
▪ Restores engine compression, reduces wear & saves engine rebuilds.
▪ Reduces engine smoke .. BLACK, WHITE & BLUE.
▪ Improves cold starting.
▪ Saves fuel & reduces “greenhouse gases” by 8-10%.
▪ Saves oil usage by up to 50%.
▪ Reduces “blow-by” & soot to significantly reduce the number of oil changes.
▪ Helps control “diesel bug”.
A 500ml easy to use “squeeze-measure-pour” pack treats up to 800L of fuel (1:1600).
Find Out More about FTC decarbonizer
NanoEnergizer “restorative ceramic nanotechnology” rebuilds worn metal surfaces in engines, bearings and machinery
Eco-friendly NanoEnergizer works without you touching a spanner .. no expensive downtime !
Simply add NanoEnergizer to your lubricating oil.
Cracked, scoured and rough worn metallic parts are selectively repaired over several operating hours. After treatment, the worn parts of the engine, or bearing are restored and the NanoEnergizer forms a highly efficient lubricant membrane on the working surfaces.
Platinum coated NanoEnergizer is unlike other types of chemical based additives such as polymers, molybdenum salts, graphite and PTFE.
NanoEnergizer can be used for any type of engine, or bearing that uses mineral and synthetic lubricating oil.
Just a single treatment of NanoEnergizer will usually result in a more powerful engine with smoother, quieter, more economical running. NanoEnergizer lasts for about 30,000km in car engines. For ongoing protection, simply retreat the engine oil.
Reported effects are ..
▪ Fuel savings from 8-21% (up to 40% in idle mode)
▪ Lowered noise and vibration levels
▪ Restored bearing surfaces and protection against wear
▪ 100 times reduction in the friction coefficient
▪ Increased oil pressure
▪ Restored engine power back up to 100%
▪ 3-9 times reduction in carbon monoxide (CO) and hydrocarbons in the exhaust .. “good news” for the environment
NanoEnergizer “restorative ceramic nanotechnology” may save an otherwise major mechanical repair. A 30ml sachet treats up to 10L of oil.
Find Out More about NanoEnergizer
Neptune Rust Stain Remover & Teak Brightener
(Note: Not Available for Air Transport)
Works quickly on most rust stains & yellowing on Hulls, Decks, Sails and Stainless Steel. Cleans and brightens teak. Suitable for use on gel-coat, enamel paints, lacquers, stainless steel, sail cloths, most fabrics and teak.
Rust Stains: Simply apply undiluted product with a rag, soft nylon brush or sponge onto rust-stained surfaces .. leave 2-5 minutes while stains disappear .. wash residual product off thoroughly with fresh or salt water. Sail cloth and fabrics can usually be spot treated. Wash off thoroughly. As with all fabric cleaning products, test this product on a non-critical area to ensure colour fastness and fabric safety.
Note: Thoroughly wash dark coloured surfaces within 5 minutes of application.
Heavily stained areas, such as “rust spots” on sails and “rust runs” from fittings, may require repeat treatments, or more than a few minutes to remove the rust stain. NEPTUNE Rust Stain Remover works best when surfaces remain wet, or damp during the treatment period, therefore it is best to avoid fast drying conditions.
DECKS and other TEAK can be cleaned and brightened with undiluted product. Simply pre-wet teak .. broom on the product .. leave a few minutes .. then scrub off.
Less rust stains & brighter teak in every pack.
Find Out More about NEPTUNE Rust Stain Remover
SupaSLIP anti-friction / anti-wear / anti-rust additive for oils and hydraulic fluids
Eco-friendly SupaSLIP works without you touching a spanner .. no expensive downtime !
Simply add SupaSLIP to your oils and hydraulic fluids.
Ideal for use in hard working engines, small 2 stroke engines, power trains, heavy machinery, winches and hydraulic equipment especially where water ingression is likely.
Simply add SupaSLIP to your lubricating oil, or hydraulic fluid to get the following benefits:
▪ Reduced friction between moving components
▪ Less wear, giving longer component life
▪ More power from the same amount of fuel
▪ Reduced fuel consumption
▪ Quieter running
▪ Cooler running
▪ Smoother gear operation, including automatics
▪ Less likely mechanical seizure
▪ Internal rust protection
▪ Helps prevent engine seizures
SupaSLIP* in engine oil resists up to 5.7 times more load, plus over 20 times the duration without seize-up, compared with oil alone .. a huge benefit if your engine suddenly runs out of coolant, or oil pressure.
A 250ml easy to use “squeeze-measure-pour” pack treats 25-50L of oil, or 100L hydraulic fluid.